Skip to main content

DJI Matrice 200 Series firmware update – v01.02.0450

Today, DJI releases a firmware update for one of its most important enterprise drones the DJI Matrice 200 series (DJI), which includes the M200 and M210. There are two firmware updates one for the battery and one for the aircraft. See below for details.

DJI Matrice 200 Series firmware update

Overview

  • Date: 2019.12.10
  • Aircraft Firmware: v01.02.0450
  • Battery Firmware: v01.00.00.87
  • Remote Controller Firmware: v01.01.0060
  • v02.00.0170(Cendence)
  • DJI GO 4 app: iOS v4.3.24, Android v4.3.25
  • DJI Pilot app: Android v1.6.1
  • CrystalSky Firmware: v2.6.6.0

What’s New?

Battery:

  • Optimized the battery level calculation.
  • Fixed the issue where the battery firmware was inconsistent with other modules when using the batteries on a Matrice 200 Series V2 aircraft.

If you have multiple batteries, please run this firmware update on all of them.

Aircraft:

  • Added support for the Zenmuse XT S.
  • Optimized obstacle sensing during flight missions. If an obstacle is detected during a flight mission, the aircraft will pause the mission, record a breakpoint and brake, and then fly backward until it arrives at the breakpoint.
  • Fixed the invalid distortion correction when using the X5S.
  • Fixed rare issue where the DJI GEO Zones database was incorrect after the aircraft restarted.
  • Fixed the issue where calibration failed due to the compass interference when using the M210 or the M210
  • RTK with an external GPS kit.

For the M210 RTK only:

  • Corrected the RTK flag for the captured photo.
  • Fixed issue: aircraft yaw now cannot be changed during RTH.

Notes DJI Matrice 200 Series firmware update:

  • Make sure to update the firmware for both the aircraft and the remote controller. Otherwise, they will not be compatible with each other.
  • Flight controller settings may be reset after firmware update. Remember to check and reconfigure the settings if needed.
  • The Zenmuse Z30 should be updated to v01.00.00.47 before using the gimbal with this firmware. Reset the gimbal parameters after the Zenmuse Z30 firmware update is complete.
  • Only newer Zenmuse XT models are compatible with the Matrice 200. A replacement may be required if your XT model isn’t supported. Please contact DJI Support to learn more about various XT model compatibility. The Zenmuse XT gimbal adapter and DJI Pilot app are also required when used with the Matrice 200.
  • If the firmware update is timed out, restart the aircraft and DJI Pilot / DJI GO 4 to confirm if the update is successful.
  • If the firmware update fails, restart the aircraft and DJI Pilot / DJI GO 4, then try updating again.

What do you think about DJI Matrice 200 Series firmware update? Let us know in the comments below.

Stay in touch!

If you’d like to stay up to date with all the latest drone news, scoops, rumors and reviews, then follow us on TwitterFacebookYouTubeInstagram or sign up for our daily email newsletter, that goes out every weekday at 6 p.m. ET.

Buy your next drone directly from manufacturers, such as DJIParrotYuneec or retailers like Adorama, AmazonB&HBestBuy, DroneNerds or eBay. By using our links, we will make a small commission at no additional cost to you. Thank you for helping DroneDJ grow!

FTC: We use income earning auto affiliate links. More.

You’re reading DroneDJ — experts who break news about DJI and the wider drone ecosystem, day after day. Be sure to check out our homepage for all the latest news, and follow DroneDJ on Twitter, Facebook, and LinkedIn to stay in the loop. Don’t know where to start? Check out our exclusive stories, reviews, how-tos, and subscribe to our YouTube channel.

Comments

Author

Avatar for Haye Kesteloo Haye Kesteloo

Haye Kesteloo is the Editor in Chief and Main Writer at DroneDJ, where he covers all drone related news and writes product reviews. He also contributes to the other sites in the 9to5Mac group such as; 9to5Mac, 9to5Google, 9to5Toys and Electrek. Haye can be reached at haye@dronedj.com or @hayekesteloo